Gun Storage: Compliance Complacency

Compliance isn’t enough.

Maybe it’s the addition of children to the house or maybe the fact my day job is essentially a compliance officer. But these days I often see cases where there is a danger of us deciding as individuals and then as a society that good enough is, well, good enough.

Gun Storage can sometimes fall under this as well.

Gun Storage
Ingenious? Maybe. The smartest of ideas? Not really.

Sure, we are nowhere near as loose as the US where the concept of a ‘nightstand’ pistol is very real as the joke of sleeping with your guns may actually be a reality, but it’s still important to stop and consider – am I doing the minimum I need to do in order to comply or am I actually taking all practical steps to ensure that my firearms are secure? There is a world of difference in both attitude and results in those two statements.

Every now and then you hear a report on stolen firearms. While it is important to note that police are not reporting increased numbers of theft, any firearms disappearing into unlicensed hands is of concern for society. What also concerns me is when I hear about how some of these robberies were performed. ‘The window was opened with a spade lying nearby and the gun case was carried away with some other items’. Was the storage compliant? Maybe? Had the owner done everything practical to prevent their theft? No. Not by a long shot.

I know of more than one shotgun that is secured by wire rope wound around a ‘stout stud’ in the garage. This was chosen because it was the cheapest way of ‘complying’ with the firearms safety requirements.

And you know what – it probably is secure. But it’s the attitude of placing cost as the priority that needs to change.

Rule 6: Store firearms and ammunition safely

You are required by law to have a safe and secure place to store your firearms. All firearms and ammunition should be stored separately, out of the reach of children, out of view and in a secure room, rack or cabinet approved by your Arms Officer.

My first ‘storage’ system was a Guncity Rack – and I will admit – as advertised, I viewed it as ‘This is the cheapest and simplest way to comply’.1 I purchased it, screwed it into a stud in a cupboard and had the arms officer come around and sign it off. Good to go!

On day. One day.
On day. One day.

There was a couple of factors that led me to replace it with a safe. The main being that I was getting into Pistol Shooting and therefore needed a suitable B Cat Safe. Compliance.

But I figured that if I was getting a safe instead of just getting a small pistol safe I should get a full size one for a couple of reasons.

I realised that I was going to want to own more than one rifle at some point.

Unbolting, pulling the gun off the bar and threading it through the front ‘holder’ meant I was banging the rifle a couple of times and wasn’t actually the world’s easiest thing.

Even though it was in a cupboard I didn’t like how ‘open’ the storage of the rifle was.

It just ‘felt’ more secure.

In the end I purchased an E Category Safe and actually hired some professional lifters (with a handy stair climbing machine) to get it into the space it needed to be. Four deadbolts into concrete, four into studs and metal plates later, and the safe was good to go! Sure, if someone was going to take to the safe with a gas axe, they would I guess eventually get it open. After making a hell of a lot of noise and likely getting a tap on the shoulder from the police – ‘why yes officer, the silent alarm has gone off, no I am not there, yes there are firearms in the building, yeah, gas-axe required’. It’s much more reassuring to me than a re-purposed locker with a padlock on it.

Is this level required for compliance? For E and B, yeah. For A? Not so much. But I would put it out to people that it’s worth considering. Especially in modern times, when we as firearm owners should be demonstrating an understanding of the responsibility we have in securing our guns when not in use.

RX100-136820151026October-26,-2015Bolt and ammo?

Ohhhh… contentious subject. It’s required that either ammo is stored separately, or the firearm is made incapable of firing. I personally, like to keep to bolts in the firearms to protect the action and internals and also to protect the bolt head itself. The ammo is locked away separately. However, if I am heading away for any period of time, then I would remove the bolts and store separately as well (hell, if I am heading overseas, they are likely going to another address totally). Again – totally not required or expected – but it’s easy enough to organise, so why not?

Gun Storage when travelling?

This is where things can get interesting.

I am going to write another article on this, more focused on travelling gun storage with competition firearms on my other site soon2, so I will only really talk about hunting guns here.

Generally, if you are travelling, the firearm is in the vehicle with you. As per regulations, you can’t leave the vehicle unattended with firearms in it. This means you need to do a little bit of forward planning.

For a start – don’t put it in the back seat (or the front), or anywhere that it’s going to be obvious to anyone looking in on it. This is a reason why a plain, not blatantly obvious case is a good thing. In my eagerness (ignorance?) of a first rifle purchase I got a rifle bag in blaze camo. It basically screams gun. In hindsight not the best of ideas. Much like the pelican case with gun stickers all over it, while we don’t need to be ashamed or shy about owning firearms we don’t need to be drawing excessive attention to the fact we have a firearm being transported.

No. Not seriously.
No. Not seriously.


The Arms Regulations require these minimum standards when storing your firearm:

  • A firearm must not be put in any place where a child has ready access to it.
  • Ammunition must be stored separately or the firearm made incapable of firing.
    • If possible, remove the bolt and magazine and lock away separately from the firearm.
    • Make sure both the chamber and the magazine are empty.
    • For lever, pump or semi-automatic firearms, you may not be able to remove the action. Break-open types can be dismantled.
    • Trigger-locking devices are recommended for firearms which cannot be taken apart.
  • Licence holders must take reasonable steps to secure firearms against theft. These steps include:
  • Locking your firearm away in:
    • A lockable cabinet, container or receptacle of ‘stout construction’ i.e. strong enough to stop a child or casual opportunist thief getting access. Putting a lock on a cupboard, wardrobe or gun-case is not enough.
    • Generally, the cabinet/container must be used for storing firearms only.
    • A display cabinet or rack which locks in and immobilises firearms so they can not be fired.
    • A steel and concrete strong-room.
  • Unloading and locking your firearm away whenever it is not in use or not under the immediate supervision of a licence holder.
  • Never leaving your firearm in an unattended vehicle.

  1. I also note – as a strange additional point – it says ‘So simple to use you will lock your guns away every time’. Well, no, you WILL lock your guns away every time. It’s the law and the responsible thing to do. Easy or not. 

  2. thebloke.co.nz 

Shoot straight(er).

Get your rifle sorted - proper zero, basic ballistics and confirmed to distance.

Popular articles

Matching twist rate and bullet weight in rifles.

The are many benefits to understanding and matching the twist rate of your barrel with the projectile weight you are using. Primarily, accuracy.

T-Bone Steaks

I have fallen for T-Bones recently. What isn't to like about them? They are great value for money, full of taste, and have a bonus feature - the Missus will generally not be able to finish all of hers so I get to eat one and a half T-bone steaks.

Three ways you are probably zeroing your hunting rifle wrong.

Clickbait title aside - there are a couple of reoccurring problems I see when people discuss zeroing a rifle. Are you doing any of them?

Getting your New Zealand Firearms Licence – the definitive guide (2019)

The process of applying for your New Zealand Firearms Licence is easy. Learn the steps, get started here and get shooting!

A Single Stage Trigger Vs Two Stage Trigger

Oh, if only it was that easy - the question of Single Stage Trigger Vs Two Stage Trigger comes up quite often - here are my thoughts on it...

How much magnification do I need in a rifle scope?

While many people assume that you need more zoom the further you get out, more zoom comes with its own downsides.
Kerry Adams
Kerry Adamshttps://thebloke.co.nz
A constant learner with an inquisitive mind, Kerry created Precision Shooter as a way to share what he was learning from the community of experts he found himself surrounded by. Somewhere along the line, he picked up one or two things himself. But don't call him an expert.

Get your rifle sorted.

Send us your rifle, or come out and do it with us. For a session, for a day. Come get the most out of your firearm. We can take your through the whole process.

I know. We all hate popups.
But, the fact remains that eMails are the best way for us to keep you up to date with what is going on at The Bloke. Join over 19650 others who are part of The Bloke community - every week you will get a short update from me. Be the first to know about new resources, upcoming events, courses and more.
We respect your privacy. No SPAM. Ever. Hit escape to make this go away. Apologises if you see this more than once. That's what cookies are for... ;)
It's easy: complete this form and click the button to get the targets.
Get our range of sighting in, testing and fun targets - calibrated for both meters and yards, MIL and MOA.
As well as sending out the targets, we will add you to the shooter's newsletter - updates on articles, events and news relevant to the NZ shooter.